Release agents
Bio-based solvents for release agents:
ASTROBIO™ DP, G1, G4, sample on request.
ASTROBIO™ DP replaces DPM in release agents; G1 and G4 are water-emulsifiable grades, and G4 is used in release agents for construction chemicals. Bio-based grades for release agent formulators.
1 ASTROBIO™ grades for this application
Technical data sheets in the Reserved Area
Answers from our chemists
Solvent to replace
Bio-based grades
ASTROBIO™ DP
G4
G1
DPM
Replaced by ASTROBIO™ DP in release agent formulations.
G4
Used in release agents for construction chemicals.
2006
Astrobio has been developing bio-based solvents in Italy since 2006.
TDS
Every grade has its technical data sheet, available in the Reserved Area after registration.
ASTROBIO™ DP replaces DPM in release agents.
Tell us how you use DPM today and we suggest the grade to test first.
ASTROBIO™
DP
Replaces
DPM
ASTROBIO™ DP replaces DPM (CAS 34590-94-8) in release agents.
DPM replacementFlash point, evaporation rate, solubility parameters and the other values are in each grade's technical data sheet, available after registration.
All solvents we replaceSpecialty grades for release agents.
Grades designed for a formulation task rather than for one solvent.
G4
Construction chemicals
ASTROBIO™ G4 is a water-emulsifiable grade used in release agents for construction chemicals.
Technical data sheet
G1
Water-emulsifiable grade
ASTROBIO™ G1 is a water-emulsifiable grade, also used to formulate eco paint strippers.
Technical data sheetFrom your current solvent to ASTROBIO™ in four steps.
01
Ask for a sample
Tell us your solvent, your application and your process: we suggest the grade to test.
02
Read the data sheet
Register to the Reserved Area and download the technical data sheet of the suggested grade.
03
Test it against your current solvent
Run your usual lab method side by side with your current recipe. When your application needs it, we adapt the blend.
04
Pilot, then supply
Confirm the result on your line, then switch to the grade that passed your tests.
ASTROBIO™ DP replaces DPM (CAS 34590-94-8).
ASTROBIO™ G4 is used in release agents for construction chemicals. Tell us your system and we suggest how to test it.
Some formulations take the suggested grade directly, others need an adjustment. Test the grade side by side with your current recipe: when your application needs it, we adapt the blend.
Fill in the form on this page with the solvent you use today and your application: our chemists reply by email with the suggested grade and send you a sample. Technical data sheets are in the Reserved Area, after registration.
Request your
ASTROBIO™ sample.
Tell us your release agent and the solvent you use today: our chemists suggest the grade to test and send you a sample.
A sample of the suggested grade
Its technical data sheet
A chemist who reads your process