Composites and resin tools

Bio-based acetone alternative for composites:
ASTROBIO™ K1, AP, AP3, sample on request.

ASTROBIO™ K1 replaces acetone to clean composite tools and resins; AP and AP3 remove saturated and unsaturated polyester and acrylic resins, with AP3 stronger than AP. Bio-based grades for composite manufacturers and their suppliers.

3 ASTROBIO™ grades for this application

Technical data sheets in the Reserved Area

Answers from our chemists

Solvent to replace

Acetone

Bio-based grades

ASTROBIO™ K1

AP

AP3

Acetone

Replaced by ASTROBIO™ K1 to clean composite tools and resins.

AP3

A resin remover stronger than ASTROBIO™ AP, for saturated and unsaturated polyesters and acrylics.

2006

Astrobio has been developing bio-based solvents in Italy since 2006.

TDS

Every grade has its technical data sheet, available in the Reserved Area after registration.

ASTROBIO™ K1 replaces acetone in composites.

Tell us how you use acetone today and we suggest the grade to test first.

ASTROBIO™

K1

Replaces

Acetone

ASTROBIO™ K1 replaces acetone and removes paints and coatings based on acrylic, polyamide and vinylic polymers.

Acetone replacement

Flash point, evaporation rate, solubility parameters and the other values are in each grade's technical data sheet, available after registration.

All solvents we replace

Resin removers for composite tools.

Grades designed for a cleaning task rather than for one solvent.

Ribbed laminating roller and brushes, one half encrusted with cured polyester resin and one half clean

AP

Resin remover

ASTROBIO™ AP removes saturated and unsaturated polyester and acrylic resins.

Technical data sheet
Steel spatula and mixing paddle caked with hardened resin, with the tip cleaned

AP3

Stronger resin remover

ASTROBIO™ AP3 is a resin remover stronger than AP.

Technical data sheet

From your current solvent to ASTROBIO™ in four steps.

01

Ask for a sample

Tell us your solvent, your application and your process: we suggest the grade to test.

02

Read the data sheet

Register to the Reserved Area and download the technical data sheet of the suggested grade.

03

Test it against your current solvent

Run your usual lab method side by side with your current recipe. When your application needs it, we adapt the blend.

04

Pilot, then supply

Confirm the result on your line, then switch to the grade that passed your tests.

Buyers' questions on composites cleaning.

Can't find yours? Ask our chemists.

Request your sample

Yes: ASTROBIO™ K1 replaces acetone. For polyester and acrylic resins, ASTROBIO™ AP and the stronger AP3 are resin removers.

Start from AP for saturated and unsaturated polyester and acrylic resins; AP3 is stronger than AP. Tell us your resin and your process and we suggest the grade.

Some formulations take the suggested grade directly, others need an adjustment. Test the grade side by side with your current recipe: when your application needs it, we adapt the blend.

Fill in the form on this page with the solvent you use today and your application: our chemists reply by email with the suggested grade and send you a sample. Technical data sheets are in the Reserved Area, after registration.

Request your
ASTROBIO™ sample.

Tell us your resin, your tools and the solvent you use today: our chemists suggest the grade to test and send you a sample.

A sample of the suggested grade

Its technical data sheet

A chemist who reads your process

Already registered? Log in for the data sheets

Request sent

Thank you. We have received your request: we will reply by email.

Shopping Basket
en_GBEnglish
Scroll to Top