Coil coating
Bio-based solvents for coil coatings:
ASTROBIO™ PA, DS, XT, sample on request.
ASTROBIO™ PA replaces PM acetate, DS replaces dibasic esters (DBE) and XT replaces toluene and xylene in coil coating formulations. Bio-based solvents for coil coating formulators who want to remove petrochemical solvents from their recipes.
3 ASTROBIO™ grades for this application
Technical data sheets in the Reserved Area
Answers from our chemists
Solvents to replace
Bio-based grades
ASTROBIO™ PA
DS
XT
3
Petrochemical solvent families replaced in coil coatings: PM acetate, dibasic esters, toluene and xylene.
XT
Also used by European customers in technical and aesthetic coatings for the automotive industry.
2006
Astrobio has been developing bio-based solvents in Italy since 2006.
TDS
Every grade has its technical data sheet, available in the Reserved Area after registration.
Three ASTROBIO™ grades replace your coil coating solvent.
Each grade replaces one petrochemical solvent. Tell us which one you use and we suggest the grade to test first.
ASTROBIO™
PA
Replaces
PM acetate
ASTROBIO™ PA replaces PM acetate (CAS 108-65-6) in coil coatings.
PM acetate replacementASTROBIO™
DS
Replaces
Dibasic esters (DBE)
ASTROBIO™ DS replaces dibasic esters (DBE) in coil coatings.
Dibasic esters replacementASTROBIO™
XT
Replaces
Toluene
Xylene
ASTROBIO™ XT replaces toluene and xylene in coil coatings.
Xylene replacementFlash point, evaporation rate, solubility parameters and the other values are in each grade's technical data sheet, available after registration.
All solvents we replaceAutomotive coatings and artificial leather: ASTROBIO™ XT
Used in technical and aesthetic coatings for the automotive industry and, as an alternative to xylene, in special paints for artificial leather refinishing. European customers use it to improve the labelling, the ecotoxicological profile and the bio-based content of their formulations.
From your current solvent to ASTROBIO™ in four steps.
01
Ask for a sample
Tell us your solvent, your application and your process: we suggest the grade to test.
02
Read the data sheet
Register to the Reserved Area and download the technical data sheet of the suggested grade.
03
Test it against your current solvent
Run your usual lab method side by side with your current recipe. When your application needs it, we adapt the blend.
04
Pilot, then supply
Confirm the result on your line, then switch to the grade that passed your tests.
ASTROBIO™ PA replaces PM acetate (CAS 108-65-6). For dibasic esters test ASTROBIO™ DS, for toluene and xylene ASTROBIO™ XT.
Yes: European customers use ASTROBIO™ XT in technical and aesthetic coatings for the automotive industry and in special paints for artificial leather refinishing.
Some formulations take the suggested grade directly, others need an adjustment. Test the grade side by side with your current recipe: when your application needs it, we adapt the blend.
Fill in the form on this page with the solvent you use today and your application: our chemists reply by email with the suggested grade and send you a sample. Technical data sheets are in the Reserved Area, after registration.
Request your
ASTROBIO™ sample.
Tell us your coil coating and the solvent you use today: our chemists suggest the grade to test and send you a sample.
A sample of the suggested grade
Its technical data sheet
A chemist who reads your process